What's up party people? Here are the updates on the water issues as well as some other neighborhood stuff.
Water Issues Continued...
Dishwasher - I took your advice and ran an empty load with a cup of vinegar. This seems to have done the trick and the dishes are coming out clean again. Thanks for the advice! I was chatting with our PM today and the dishwasher came up, he told me about a product that accomplishes the same goal of removing the hard water deposits under an empty load. I would like to find out what this is because I read other responses saying that vinegar isn't good for the dishwasher plumbing long term. The other option would be a whole-house hard water treatment system, but I'm not ready for that yet.
Aquarium - Leaving the light off for a few days started clearing the water, but it doesn't do much good to have a dark aquarium 24x7. Anyway, the UV Sterilizer came on Friday and it's been chugging for about 4 days now. It is making a clear difference. While the water isn't crystal clear yet, I can see to the back and see the fish. The tank could use a good cleaning again so that's coming. Found the sterilizer on eBay for about $25+Shipping. Satisfied with it so far.
Radon Pipe - The idea from the Foundation Restoration people was to core a new pipe, move the pipe over & seal off the old one with cement. Since the pipe is near the sump ditch, he wants to try drilling a hole from the pipe to the sump to relieve the pressure and send the water directly to the sump. Another theory is that the water is coming from above where the radon pipe exhausts from the house. We'll see how this latest theory goes.
Water Meter Leak - Few days ago, we found a small puddle in the basement by the water meter. So we called the customer service line, they sent a plumber out who knew instantly that the meter itself was leaking. The township provides the meters so it would have to be fixed once they got the meter. This has since occurred and the new meter appears to be happy
Association News
We received a letter from our Associations management company. Since 25% of the community has settled, it is time for one of the owners to take one of the 3 spots on the HOA board. I responded that I was interested and was the only one. My wife and I were the only homeowners to attend the meeting. Met the developer and a rep from the management company. I'm not officially on the board, which won't have another meeting until 75% of the homes have settled, then the other 2 seats will be taken by homeowners. Other than that, not much to do.
Tuesday, November 22, 2011
Sunday, November 13, 2011
Water Issues (All different and non-related)
Hey all,
I guess you can say things are settling down. Major projects out of the way. Freak snow storm out of the way...
Dishwasher - We do have a few things going on. The dishwasher is becoming increasingly annoying. At 1st I thought it was me (being a guy running the dishwasher) and putting things in that I shouldn't be, but it's been getting progressively worse. Our dishwasher leaves a white residue on almost everything, the residue can generally be hand-washed off, but don't get me started on how annoying that is. I heard a few of the neighbors complaining of the same issue, so I wonder if it's something in the water. We use the ready-pack thingies where the amount of detergent is predetermined. I've tried the powder style AND the Cascade gel style. Have also tried using the Cascade rinse-aid and that sure didn't help. If I slide my finger on the inside plastic of the door, there is a dusty white residue. I'm getting very close to calling GE and requesting service. Is it possible this is a hard water issue?
Aquarium - I've been having a heck of a time with Green Water in our 25 gallon aquarium. I can do complete water changes and it comes back in a few days. So green you can't see the fish. It's essentially a form of algae but lives in single cell microbes (sorry bio folks....). Long story short is that it lives everywhere, including in the fish. I'm told it's a result of too much food and too much light. I put up blinds over the sliding door which reduces 90% of the direct sunlight. The rest is ambient, still not enough. Apparently now that the green is here, I need to starve it away. I can try leaving the light off and changing 2 gallons a day for a month, that 'should' starve it little by little. To be honest, I'm not that patient, and I travel at least 2 of the next couple weekends. The other option is getting a UV Sterilizer Pump which essentially vaporizes the green gunk as it passes through. This should clean up the problem as well as clear up (pun intended because I'm a dork) any future issues. Waiting for the UV thing to show up in the mail!
Radon Pipe - This issue has been on-going since the 30-day Walkthrough. It looks as if water is coming up through the radon pipe in the basement. It's usually just a smaller puddle, and the pipe is a foot away from the sump so it's more annoying than anything. I don't believe the finished basement is in danger.
Ryan had people come to seal it up, failed. I think they came back and that didn't work out. So now they're going to an outside company called "Foundation Restoration" and his guy couldn't figure it out, so the owner of the company came by. He's been doing this for 17 years an thought he had seen it all, this is a new one for him. His only 'out of the box' theory is that maybe there was water coming from the roof into the radon pipe from above and the leak is not actually ground water. Jury is still out, they're talking about coring a new hole, moving the pipe and cementing the old one out. I don't care, just want it fixed.
Other than those items, things are progressing. I have plans ready to build 4x8 basement shelves but don't want to do that until the radon pipe issue is fixed. Oh well.
I guess you can say things are settling down. Major projects out of the way. Freak snow storm out of the way...
Dishwasher - We do have a few things going on. The dishwasher is becoming increasingly annoying. At 1st I thought it was me (being a guy running the dishwasher) and putting things in that I shouldn't be, but it's been getting progressively worse. Our dishwasher leaves a white residue on almost everything, the residue can generally be hand-washed off, but don't get me started on how annoying that is. I heard a few of the neighbors complaining of the same issue, so I wonder if it's something in the water. We use the ready-pack thingies where the amount of detergent is predetermined. I've tried the powder style AND the Cascade gel style. Have also tried using the Cascade rinse-aid and that sure didn't help. If I slide my finger on the inside plastic of the door, there is a dusty white residue. I'm getting very close to calling GE and requesting service. Is it possible this is a hard water issue?
Aquarium - I've been having a heck of a time with Green Water in our 25 gallon aquarium. I can do complete water changes and it comes back in a few days. So green you can't see the fish. It's essentially a form of algae but lives in single cell microbes (sorry bio folks....). Long story short is that it lives everywhere, including in the fish. I'm told it's a result of too much food and too much light. I put up blinds over the sliding door which reduces 90% of the direct sunlight. The rest is ambient, still not enough. Apparently now that the green is here, I need to starve it away. I can try leaving the light off and changing 2 gallons a day for a month, that 'should' starve it little by little. To be honest, I'm not that patient, and I travel at least 2 of the next couple weekends. The other option is getting a UV Sterilizer Pump which essentially vaporizes the green gunk as it passes through. This should clean up the problem as well as clear up (pun intended because I'm a dork) any future issues. Waiting for the UV thing to show up in the mail!
Radon Pipe - This issue has been on-going since the 30-day Walkthrough. It looks as if water is coming up through the radon pipe in the basement. It's usually just a smaller puddle, and the pipe is a foot away from the sump so it's more annoying than anything. I don't believe the finished basement is in danger.
Ryan had people come to seal it up, failed. I think they came back and that didn't work out. So now they're going to an outside company called "Foundation Restoration" and his guy couldn't figure it out, so the owner of the company came by. He's been doing this for 17 years an thought he had seen it all, this is a new one for him. His only 'out of the box' theory is that maybe there was water coming from the roof into the radon pipe from above and the leak is not actually ground water. Jury is still out, they're talking about coring a new hole, moving the pipe and cementing the old one out. I don't care, just want it fixed.
Other than those items, things are progressing. I have plans ready to build 4x8 basement shelves but don't want to do that until the radon pipe issue is fixed. Oh well.
Thursday, November 3, 2011
Northeast Snow
On Saturday we got hit with a freak snow storm. My area received 8-10 inches which is normally not a big deal, but two things made it a unique problem. The snow was the wet and heavy variety, not normally a problem. The problem is that the fall foliage is just starting to change so the leaves are on the trees. Add 8-inches of snow to that, and tree limbs started falling. We lost power at 3pm on Saturday.
Here is where the gas fireplace was worth every penny spent. I remember our PM telling us it has a battery backup during power outages so now would be a good time to test it out. Nothing...ugh oh! I pop the grate off the bottom section and find the control unit needs 4-AA batteries. This was a quick fix and our fireplace was ablaze. If it wasn't for this, I'm not sure what we would have done. Some of our neighbors did not opt for this option and their houses were so cold they stayed with friends.
The 1st night, before going to sleep, I checked on the sump pit and the water was only slightly above normal, OK no problem. On Sunday morning, the water level was 2-inches from the top. Being an IT person, it never occurred to me to get out a bucket and manually bail it out. So I went to the nearest auto store and picked up a 1,000 watt power inverter. Ran an extension cord into the basement, attached the thing to my running car and ran the sump. The temperature rose back into the 50's then on, so the snow started melting very fast. I ran the pump 3-4 times a day to keep it well below level. Turns out our neighbors had the same water issues, so it looks like the water table in our neighborhood is 8-10 feet below ground level.
The power finally returned on mid-day Tuesday. I heard reports that other locals in more rural areas didn't get it back until yesterday or even today so we should count ourselves lucky.
We are thinking about getting a battery backup emergency sump pump system in case we are away and this happens again. Also looking into a backup generator although that isn't really in the budget right now.
Here is where the gas fireplace was worth every penny spent. I remember our PM telling us it has a battery backup during power outages so now would be a good time to test it out. Nothing...ugh oh! I pop the grate off the bottom section and find the control unit needs 4-AA batteries. This was a quick fix and our fireplace was ablaze. If it wasn't for this, I'm not sure what we would have done. Some of our neighbors did not opt for this option and their houses were so cold they stayed with friends.
The 1st night, before going to sleep, I checked on the sump pit and the water was only slightly above normal, OK no problem. On Sunday morning, the water level was 2-inches from the top. Being an IT person, it never occurred to me to get out a bucket and manually bail it out. So I went to the nearest auto store and picked up a 1,000 watt power inverter. Ran an extension cord into the basement, attached the thing to my running car and ran the sump. The temperature rose back into the 50's then on, so the snow started melting very fast. I ran the pump 3-4 times a day to keep it well below level. Turns out our neighbors had the same water issues, so it looks like the water table in our neighborhood is 8-10 feet below ground level.
The power finally returned on mid-day Tuesday. I heard reports that other locals in more rural areas didn't get it back until yesterday or even today so we should count ourselves lucky.
We are thinking about getting a battery backup emergency sump pump system in case we are away and this happens again. Also looking into a backup generator although that isn't really in the budget right now.
Friday, October 28, 2011
Garage Shelves
Another project down! Below are pictures of the garage shelves I built this week. I used the same type of lumber and design concept as the workbench so they actually look similar.
In the pictures below you can also see the pegboard & shelf above that. I finally have usable space in the garage and can start the process of properly storing a lot of our 'stuff' that's been on the floor since the move. Let me know what you think. Next project is basement shelves (completely different design)
In the pictures below you can also see the pegboard & shelf above that. I finally have usable space in the garage and can start the process of properly storing a lot of our 'stuff' that's been on the floor since the move. Let me know what you think. Next project is basement shelves (completely different design)
- Specifications
- Ceiling Height: 10'
- Shelf Dimensions: 2D x 4W x 8H
- Legs
- Kiln Dried 4x4x8 (actually measures 3.5)
- Left side has 3" cut off to accommodate concrete lip on floor
- Stretchers: Kiln Dried 2x4x8
- Joinery
- Side-to-Side
- Rows 1 & 3: 5/16 Threaded rod
- Rowes 2 & 4: 5/16 dowels glued
- Front-to-Back:
- Rows 1 & 3: 5/16 dowels glued
- Rowes 2 & 4: 5/16 Threaded rod
- Shelves: 3/4' MDF Board
- Attached to wall studs with 5/16 x 5 lag bolts
Labels:
Garage Shelves
Friday, October 21, 2011
Workbench Project Complete
There's a catch when building a workbench, you don't have a workbench to build a workbench on! Luckily I have a miter saw which got me through most of the base. A home-made jig helped me make straight cuts for the shelves and I was able to borrow a table router from a friend (for the joinery).
The video explains very well and provides a PDF plan (free) which helps in planning the project. The bench-top is two pieces of MDF laminated together with wood glue, then mounted with screws. The joinery of the general structure is my favorite part of this bench, you wouldn't believe how rock solid it is. The stretchers each have threaded rod through them which creates tremendous strength in the base.
I couldn't find the type of clips the video used to mount the top so I changed the plan. Before lamination, I attached the bottom piece (of the bench top) with counter-sunk screws to the base. In total, there are about 12 screws holding the bottom piece to the base. I then followed the rest of the lamination instructions and had no issues completing the project. The only downside of this is that the top is now permanent, I don't see it coming apart to have a new top put on. If I do have to replace the top at some point, my plan is to just add another sheet of MDF, remove the screws, and use a longer screw to mount the new piece. I can't see being necessary for many years if ever.
Further diverting from the plan, I attached a bench vice from my Grandfather's work shop. He would be proud I built this and appreciative that I am using his tools in the process. I would have loved to use the type from the video, but I didn't feel like spending $90 on it AND I didn't build this for "Fine Woodworking"... It's a workbench.
Free Plan & Instructional Video - www.FineWoodworking.com
I will be mounting pegboard above the bench to better manage tool storage. I found a 100-piece peg-hook kit on ebay for a reasonable price.
The video explains very well and provides a PDF plan (free) which helps in planning the project. The bench-top is two pieces of MDF laminated together with wood glue, then mounted with screws. The joinery of the general structure is my favorite part of this bench, you wouldn't believe how rock solid it is. The stretchers each have threaded rod through them which creates tremendous strength in the base.
I couldn't find the type of clips the video used to mount the top so I changed the plan. Before lamination, I attached the bottom piece (of the bench top) with counter-sunk screws to the base. In total, there are about 12 screws holding the bottom piece to the base. I then followed the rest of the lamination instructions and had no issues completing the project. The only downside of this is that the top is now permanent, I don't see it coming apart to have a new top put on. If I do have to replace the top at some point, my plan is to just add another sheet of MDF, remove the screws, and use a longer screw to mount the new piece. I can't see being necessary for many years if ever.
Further diverting from the plan, I attached a bench vice from my Grandfather's work shop. He would be proud I built this and appreciative that I am using his tools in the process. I would have loved to use the type from the video, but I didn't feel like spending $90 on it AND I didn't build this for "Fine Woodworking"... It's a workbench.
Free Plan & Instructional Video - www.FineWoodworking.com
I will be mounting pegboard above the bench to better manage tool storage. I found a 100-piece peg-hook kit on ebay for a reasonable price.
Labels:
Workbench
Sunday, October 16, 2011
30 Day Walkthrough and Updates
Wow it's been a while! My brother-in-law had his wedding in Virginia last weekend and things have been crazy all around. We blinked and it was time for our 30-Day Walk-through. I wasn't going to be able to participate in the Walk-through so my wife took the reigns on this. She had been keeping a list of items and I only had a few to contribute. Overall, I can't complain about the quality and craftsmanship. They did a great job.
The only thing I'm worried about is how frequently the sump pump runs. I'll notice it run about once a day. I thought the sump was supposed to only run once in a blue moon or during heavy rains after a few days. It's good that it's working, but I'm a little worried about an underlying drainage issue. I'll have to discuss with our PM when I get a chance.
Most of the major projects (garage door opener, utility sink, ceiling fans) are complete, I'm moving on to more utility-like projects. I found a video and pdf plan for a work bench in the garage. The dimensions are 2x5ft overall and is extremely solid structurally. I'm about 3/4 the way through building the base and will tackle the bench-top with my friend this week. Once the bench is finished, I'm going to build shelves on the wall of the garage. Then we'll be able to store things in a better place than the floor of the garage or basement. Next project will be shelves in the unfinished sections of the basement. I'll be sure to post pictures when I have something to show!
Remember the pool table I couldn't get down the basement? Well it's finally gone. Put it up on Craigslist and a guy came this weekend to pick it up. The cursed table left it's mark on me however. We were carrying the 350-lb piece of slate up the stairs when I had to set it down, it came down between the stair and my hand, I can't remember how we got it up the rest of the way since my hand was out of commission. I fear it was broken so I went for an x-ray. Somehow there were no breaks! Only a "Deep Contusion" and it hurts when I try to squeeze hard or use it other than typing. If that's the price to pay to get rid of the pool table, fine. It's gone. I do however get to enjoy the new (old) pool table which worked out great!
The only thing I'm worried about is how frequently the sump pump runs. I'll notice it run about once a day. I thought the sump was supposed to only run once in a blue moon or during heavy rains after a few days. It's good that it's working, but I'm a little worried about an underlying drainage issue. I'll have to discuss with our PM when I get a chance.
Most of the major projects (garage door opener, utility sink, ceiling fans) are complete, I'm moving on to more utility-like projects. I found a video and pdf plan for a work bench in the garage. The dimensions are 2x5ft overall and is extremely solid structurally. I'm about 3/4 the way through building the base and will tackle the bench-top with my friend this week. Once the bench is finished, I'm going to build shelves on the wall of the garage. Then we'll be able to store things in a better place than the floor of the garage or basement. Next project will be shelves in the unfinished sections of the basement. I'll be sure to post pictures when I have something to show!
Remember the pool table I couldn't get down the basement? Well it's finally gone. Put it up on Craigslist and a guy came this weekend to pick it up. The cursed table left it's mark on me however. We were carrying the 350-lb piece of slate up the stairs when I had to set it down, it came down between the stair and my hand, I can't remember how we got it up the rest of the way since my hand was out of commission. I fear it was broken so I went for an x-ray. Somehow there were no breaks! Only a "Deep Contusion" and it hurts when I try to squeeze hard or use it other than typing. If that's the price to pay to get rid of the pool table, fine. It's gone. I do however get to enjoy the new (old) pool table which worked out great!
Monday, October 3, 2011
MIA & Fridge
Sorry I've been MIA. Been a lot going on just getting back to a normal life. We're coming along with unpacking. It's mostly odds & ends left.
Had the pool table delivered on Wednesday, so now I have a new distraction. Tuesday night, I noticed the temperature in the refrigerator was higher than normal, way higher. Next thing I knew there was a buzzing noise that sounded like it was the compressor. I called the GE Applicances hotline that Ryan gives in our homeowners manual. Since the fridge wasn't cooling, they consider it an emergency and have to have someone there within 24 hours. A repair man came the next day around 1pm. He said the board in the fridge was defective and probably never worked. He ran diagnostics on the board and it came back with a FAIL code of some kind. Since he wasn't a GE tech, he had to special order the part and would come back to install.
He defrosted the fridge and got it working for the short term. He said the root problem isn't solved yet but this should buy us a few days. Since then the fridge has been fine, but apparently still can't regulate itself because of this defective board. We only lost a little bit of food that couldn't handle being defrosted. Hopefully it's fixed and we're good to go.
Had the pool table delivered on Wednesday, so now I have a new distraction. Tuesday night, I noticed the temperature in the refrigerator was higher than normal, way higher. Next thing I knew there was a buzzing noise that sounded like it was the compressor. I called the GE Applicances hotline that Ryan gives in our homeowners manual. Since the fridge wasn't cooling, they consider it an emergency and have to have someone there within 24 hours. A repair man came the next day around 1pm. He said the board in the fridge was defective and probably never worked. He ran diagnostics on the board and it came back with a FAIL code of some kind. Since he wasn't a GE tech, he had to special order the part and would come back to install.
He defrosted the fridge and got it working for the short term. He said the root problem isn't solved yet but this should buy us a few days. Since then the fridge has been fine, but apparently still can't regulate itself because of this defective board. We only lost a little bit of food that couldn't handle being defrosted. Hopefully it's fixed and we're good to go.
Subscribe to:
Posts (Atom)